Are you ready to take your motorcycle rides to the next level with the JBL WIND 2? This powerful Bluetooth speaker is designed to provide an immersive audio experience, even in the midst of intense winds. With its intuitive controls and durable design, the JBL WIND 2 is an ideal choice for motorcycle enthusiasts. In this article, we’ll guide you through the process of setting up your JBL WIND 2, so you can enjoy your favorite tunes while cruising down the highway.
Pre-Installation Checklist
Before we dive into the setup process, make sure you have the following items ready:
- JBL WIND 2 Bluetooth speaker
- JBL WIND 2 mounting kit (specific to your motorcycle model)
- Motorcycle battery (12V)
- Ground wire (connected to the motorcycle’s chassis)
- Power wire (connected to the motorcycle’s 12V battery)
Please note that the JBL WIND 2 is designed to work with motorcycles, UTVs, and ATVs with 12V electrical systems. Make sure your vehicle meets this requirement before proceeding with the installation.
Understanding the JBL WIND 2
Before we start setting up your JBL WIND 2, let’s take a closer look at the device itself. The JBL WIND 2 features a durable and weather-resistant design, making it perfect for outdoor use. It has a compact body, measuring 5.7 x 2.2 x 2.5 inches (including the mounting bracket), and weighs approximately 1.2 pounds.
The JBL WIND 2 has an easy-to-use interface with four control buttons:
- Power Button: Press and hold to turn the speaker on or off.
- Volume Up/Down Buttons: Use these buttons to adjust the volume to your desired level.
- Mode Button: Press this button to switch between Bluetooth, FM Radio, and Line-in modes.
Preparing Your Motorcycle
Before installing the JBL WIND 2, ensure that your motorcycle is turned off and the ignition switch is in the “OFF” position. Locate the 12V battery and the ground wire connected to the motorcycle’s chassis. You will need these wires for the installation.
If your motorcycle has a fuse box, it’s essential to check the fuse corresponding to the 12V circuit. Make sure the fuse is not blown and is rated for at least 10A. If you’re unsure about the fuse rating, consult your motorcycle’s manual or contact a professional mechanic.
Mounting the JBL WIND 2
Now it’s time to mount the JBL WIND 2 on your motorcycle. The mounting kit includes a universal bracket that fits most motorcycle models. Please follow these steps carefully:
Step 1: Choose the Mounting Location
Decide where you want to mount the JBL WIND 2 on your motorcycle. Ideally, you should choose a location that provides good protection from the elements and is within easy reach.
Popular mounting locations include:
- Handlebar mounts
- Mirror mounts
- Clutch or brake lever mounts
Consult your motorcycle’s manual or contact a professional mechanic if you’re unsure about the best mounting location for your specific model.
Step 2: Assemble the Mounting Bracket
Follow the manufacturer’s instructions to assemble the universal mounting bracket. Typically, you will need to attach the JBL WIND 2 to the mounting bracket using the provided screw.
Step 3: Mount the Bracket to the Motorcycle
Attach the mounting bracket to the chosen location on your motorcycle. Make sure it is securely fastened to prevent the JBL WIND 2 from moving while riding.
Connecting the JBL WIND 2 to Your Motorcycle’s Electrical System
With the JBL WIND 2 mounted, it’s time to connect it to your motorcycle’s electrical system. Follow these steps carefully:
Step 1: Connect the Power Wire
Connect the power wire (usually red) from the JBL WIND 2 to the 12V circuit of your motorcycle. Make sure the connection is secure and won’t come loose while riding.
Step 2: Connect the Ground Wire
Connect the ground wire (usually black) from the JBL WIND 2 to the motorcycle’s chassis. This wire provides a ground path for the speaker and helps to protect it from electrical shock.
Pairing Your Device with the JBL WIND 2
Now that the JBL WIND 2 is connected to your motorcycle’s electrical system, it’s time to pair it with your device (smartphone, tablet, or MP3 player).
Step 1: Turn On the JBL WIND 2
Press and hold the power button on the JBL WIND 2 until it turns on. You should see a flashing blue light indicating that the speaker is in pairing mode.
Step 2: Enable Bluetooth on Your Device
Turn on Bluetooth on your device and search for available devices. Select the JBL WIND 2 from the list of detected devices.
Step 3: Pair Your Device with the JBL WIND 2
Follow the on-screen instructions to complete the pairing process. Once paired, you should hear a voice prompt from the JBL WIND 2 confirming the connection.
Using the JBL WIND 2
Now that you’ve set up and paired your JBL WIND 2, it’s time to enjoy your favorite tunes while riding. Here are some essentials to keep in mind:
- Volume Control: Use the volume up/down buttons on the JBL WIND 2 to adjust the volume.
- Mode Button: Press the mode button to switch between Bluetooth, FM Radio, and Line-in modes.
- Automatic Turn-On/Off: The JBL WIND 2 can automatically turn on or off when connected to your motorcycle’s electrical system.
Troubleshooting Common Issues
If you encounter any issues while setting up or using your JBL WIND 2, refer to the following troubleshooting guide:
| Problem | Solution |
| — | — |
| Speaker not turning on | Check that the power wire is connected to the 12V circuit, and the ignition switch is in the “ON” position. |
| Poor sound quality | Check that the volume is turned up, and there are no obstructions between the speaker and the listener. |
If the above solutions don’t resolve the issue, consult the JBL WIND 2 user manual or contact a professional mechanic or a JBL customer support representative.
Conclusion
Setting up your JBL WIND 2 is a straightforward process that requires careful attention to detail. By following the steps outlined in this article, you can enjoy a seamless and immersive audio experience while riding your motorcycle. Remember to always consult your motorcycle’s manual or contact a professional mechanic if you’re unsure about any aspect of the installation. With your JBL WIND 2 installed, get ready to take your motorcycle rides to new heights.
What are the components included in the JBL WIND 2 package?
The JBL WIND 2 package includes the speaker, a car charger, a quick-start guide, and a warranty card. It’s essential to check if all the items are present in the box before setting up the device. Ensure that the items are not damaged and are in good condition.
It’s also recommended to read the quick-start guide carefully to understand the setup process and the product’s features. Additionally, register your warranty card to get assistance in case you encounter any issues with the product.
How do I connect my JBL WIND 2 to my phone via Bluetooth?
To connect your JBL WIND 2 to your phone via Bluetooth, start by turning on the Bluetooth feature on your phone and putting it in discoverable mode. Next, power on your JBL WIND 2 speaker by pressing the power button until it lights up. Once on, the speaker will enter pairing mode automatically.
Look for ‘JBL WIND 2’ in the list of available devices on your phone and select it to initiate the pairing process. If prompted for a password, enter ‘0000’ or ‘1234’, but most devices pair without requiring one. Wait for your phone to complete the pairing process, and once connected, the speaker’s LED lights will confirm the connection.
What is the recommended way to charge the JBL WIND 2 battery?
To charge the JBL WIND 2 battery, use the provided car charger and insert it into the charging port located on the speaker. Make sure the speaker’s power is turned off before charging to prevent any accidental starts. Plug the other end of the charger into a car power outlet or an adapter.
When charging the device, the LED lights will indicate the charging status. It’s essential to avoid overcharging the battery, which may affect its lifespan. So, keep an eye on the charging time and remove the charger when the battery is fully charged to maintain its health and longevity.
Can I connect my JBL WIND 2 to my car’s auxiliary port?
Yes, you can connect your JBL WIND 2 to your car’s auxiliary port using an audio cable. Locate the 3.5mm jack on the speaker and insert one end of the audio cable into it. Connect the other end of the cable to your car’s auxiliary port. This will allow you to play music from your phone through the car’s speakers.
Keep in mind that the audio cable may not be included in the package, so you may need to purchase it separately. When connected via the auxiliary port, you can enjoy your music with clear audio quality without relying on Bluetooth connectivity.
What is the effective range for hands-free calls on the JBL WIND 2?
The JBL WIND 2 allows for hands-free calls within a range of up to 10 meters (33 feet) from the device. When you receive a call, you’ll hear the ringtone through the speaker, and you can answer or reject the call using the buttons on the speaker.
When in hands-free mode, speak clearly towards the speaker for clear audio quality. If you move too far away, you may experience audio disconnections or loss of call quality, so ensure that you stay within the recommended range for seamless connectivity.
Can I pair multiple devices to the JBL WIND 2 simultaneously?
The JBL WIND 2 allows you to pair two devices simultaneously, which can be handy when sharing the speaker with friends or switching between devices. To pair multiple devices, put your first device in pairing mode, then pair it with the speaker. Disconnect the first device and pair the second one following the standard pairing process.
While paired, you can seamlessly switch between the two devices, and the speaker will remember the last connected device. Just remember that you can’t play music from both devices at the same time. The speaker will prioritize the device from which it’s currently receiving audio signals.
How do I reset my JBL WIND 2 to its default settings?
To reset your JBL WIND 2 to its default settings, start by ensuring the speaker is turned off. Press and hold the power button along with the ‘Volume Down’ button until the speaker’s LED lights flash, indicating the reset process.
The reset process typically takes a few seconds, after which the speaker will power on, and its LED lights will blink to indicate a successful reset. After resetting, the device will revert to its original settings, including Bluetooth pairing and equalizer settings. You may need to re-pair your devices after the reset process is complete.