Are you frustrated because your PS4 controller won’t connect after a reset? You’re not alone. Many gamers have experienced this issue, and it can be infuriating, especially when you’re in the middle of a gaming session. In this article, we’ll explore the possible reasons why your PS4 controller won’t connect after a reset and provide you with step-by-step solutions to resolve the issue.
Understanding the PS4 Controller Reset Process
Before we dive into the solutions, it’s essential to understand the PS4 controller reset process. The reset process is designed to restore the controller to its default settings, which can help resolve connectivity issues, lag, and other problems. There are two types of resets: a soft reset and a hard reset.
Soft Reset
A soft reset is a simple process that restarts the controller without deleting any of its settings. To perform a soft reset:
- Press and hold the PS button and the Share button simultaneously for 5 seconds.
- Release the buttons and wait for the controller to restart.
Hard Reset
A hard reset, on the other hand, restores the controller to its default settings, deleting all of its customized settings. To perform a hard reset:
- Locate the small reset button on the back of the controller, near the L2 button.
- Use a small pin or paper clip to press and hold the reset button for 5 seconds.
- Release the button and wait for the controller to restart.
Troubleshooting Steps to Resolve the Issue
If your PS4 controller won’t connect after a reset, try the following troubleshooting steps:
Check the Controller’s Battery Level
A low battery level can prevent the controller from connecting to the PS4. Make sure the controller’s battery level is above 10%. If the battery level is low, charge the controller for at least 30 minutes and try connecting it again.
Restart the PS4
Sometimes, a simple restart of the PS4 can resolve connectivity issues. Turn off the PS4, wait for 30 seconds, and then turn it back on. Try connecting the controller again.
Check for Firmware Updates
Outdated firmware can cause connectivity issues. Check for firmware updates on the PS4 and install the latest version. To check for firmware updates:
- Go to the PS4’s Settings menu.
- Select “System Software Update.”
- If an update is available, download and install it.
Reset the PS4’s Bluetooth Settings
The PS4’s Bluetooth settings can sometimes cause connectivity issues. Resetting the Bluetooth settings can resolve the issue. To reset the Bluetooth settings:
- Go to the PS4’s Settings menu.
- Select “Devices.”
- Select “Bluetooth Devices.”
- Select “Delete All Devices.”
- Restart the PS4 and try connecting the controller again.
Use a USB Cable to Connect the Controller
If the controller won’t connect wirelessly, try using a USB cable to connect it to the PS4. This will help you determine if the issue is with the controller or the PS4’s Bluetooth settings.
Check for Interference from Other Devices
Other devices in your home can interfere with the controller’s wireless signal. Try moving the controller and PS4 away from other devices and see if the issue resolves.
Advanced Troubleshooting Steps
If the above steps don’t resolve the issue, try the following advanced troubleshooting steps:
Reset the PS4’s Controller Settings
Resetting the PS4’s controller settings can resolve connectivity issues. To reset the controller settings:
- Go to the PS4’s Settings menu.
- Select “Devices.”
- Select “Controllers.”
- Select “Reset Controller Settings.”
- Restart the PS4 and try connecting the controller again.
Use a Different USB Port
If you’re using a USB cable to connect the controller, try using a different USB port on the PS4. This will help you determine if the issue is with the USB port or the controller.
Check for Damage to the Controller or PS4
Physical damage to the controller or PS4 can cause connectivity issues. Inspect the controller and PS4 for any signs of damage, such as cracks or broken ports.
Conclusion
If your PS4 controller won’t connect after a reset, don’t panic. Try the troubleshooting steps outlined in this article to resolve the issue. If none of the steps work, it’s possible that there’s a hardware issue with the controller or PS4, and you may need to contact Sony support for further assistance. Remember to always restart the PS4 and controller after making any changes to the settings to ensure that the changes take effect.
By following these steps, you should be able to resolve the issue and get back to gaming in no time.
Why won’t my PS4 controller connect after a reset?
A PS4 controller may not connect after a reset due to various reasons such as a faulty reset process, outdated controller firmware, or issues with the console’s Bluetooth connectivity. It’s essential to identify the root cause of the problem to resolve the issue effectively.
To troubleshoot the problem, try restarting your console and controller, then attempt to pair them again. Ensure that the controller is fully charged, as a low battery can prevent it from connecting properly. If the issue persists, you may need to perform a more in-depth troubleshooting process.
How do I reset my PS4 controller properly?
To reset your PS4 controller properly, locate the small reset button on the back of the controller, near the L2 button. Use a small pin or paper clip to press and hold the reset button for about 5 seconds. Release the button and wait for the controller’s lights to flash. This indicates that the controller has been reset successfully.
After resetting the controller, try pairing it with your console again. Ensure that the console is turned on and the controller is in pairing mode. If the controller still doesn’t connect, you may need to update the controller’s firmware or reset the console’s Bluetooth settings.
What should I do if my PS4 controller is not detected by my console?
If your PS4 controller is not detected by your console, try restarting both devices and attempt to pair them again. Ensure that the controller is in pairing mode and the console is set to detect new devices. If the issue persists, try resetting the controller and updating its firmware to the latest version.
If the problem still exists, try connecting the controller to the console using a USB cable. This will help you determine if the issue is related to the Bluetooth connectivity or the controller itself. If the controller works fine when connected via USB, the problem may be with the console’s Bluetooth settings or the controller’s wireless connectivity.
Can I use my PS4 controller on another console or device?
Yes, you can use your PS4 controller on another console or device, but it may require additional setup or adapters. The PS4 controller is compatible with the PlayStation 5 console, and you can pair it using the same process as with the PS4. However, if you want to use the controller on a PC or other devices, you may need to use a third-party adapter or software.
To use your PS4 controller on a PC, you can use the official DualShock 4 USB Wireless Adaptor or third-party adapters. You may also need to install additional software or drivers to enable the controller’s functionality on the PC.
How do I update my PS4 controller’s firmware?
To update your PS4 controller’s firmware, connect the controller to your console using a USB cable. Go to the console’s Settings menu and select “Devices” or “Accessories.” Choose the controller and select “Update.” The console will automatically download and install the latest firmware for the controller.
Ensure that the controller is fully charged and connected to the console during the update process. Do not disconnect the controller or turn off the console until the update is complete. If the update fails, try restarting the console and controller, then attempt the update process again.
What are some common issues that can cause PS4 controller connectivity problems?
Some common issues that can cause PS4 controller connectivity problems include outdated controller firmware, faulty Bluetooth connectivity, and interference from other devices. Other issues may include a low battery, damaged controller hardware, or incorrect console settings.
To resolve connectivity issues, try restarting your console and controller, then attempt to pair them again. Ensure that the controller is fully charged and the console is set to detect new devices. If the issue persists, try resetting the controller and updating its firmware to the latest version.
How do I troubleshoot PS4 controller connectivity issues?
To troubleshoot PS4 controller connectivity issues, start by restarting your console and controller, then attempt to pair them again. Ensure that the controller is fully charged and the console is set to detect new devices. If the issue persists, try resetting the controller and updating its firmware to the latest version.
If the problem still exists, try connecting the controller to the console using a USB cable. This will help you determine if the issue is related to the Bluetooth connectivity or the controller itself. You can also try resetting the console’s Bluetooth settings or seeking assistance from Sony’s customer support.